Water Purifier Pressure Gauge

The water purifier pressure gauge body is made of 304 stainless steel, which is corrosion-resistant and can be used for a long time in various environments, reducing future replacement costs. Internally, it uses silicone oil to reduce the impact of pressure fluctuations on the gauge needle, resulting in more stable readings. It consists of accessories such as a 2-point PE pipe, a 4-point connector, a 2-point T-bolt, a threaded to 2-point quick-connect elbow, and a pressure relief valve, facilitating installation, connection, and pressure relief protection. It is used for water pressure testing in homes and commercial settings and is suitable for the piping systems of various water-using appliances such as water purifiers and water heaters.

Precautions

When using a water purifier pressure gauge on a non-pressure-relief water purifier, insert the 2-point inlet pipe into the pressure gauge interface after the 3-way valve of the water purifier is installed. Then open the inlet valve to read the water pressure. The installation steps cannot be reversed. Before disconnecting the pipe, ensure the inlet valve is closed.

When using a pressure gauge on a pressure-relief water purifier, close the small valve. After testing, open the valve to release the water pressure in the pipe before disconnecting the pipe to prevent water splashing and equipment damage.