Products
Softened water test reagent
Softened water testing reagent is a chemical reagent used to detect the hardness components in water. Through a specific chemical reaction, it can quickly and accurately detect the hardness components in water quality, providing a scientific basis for water purification, treatment and protection, and is an important tool for water quality monitoring.
Send Inquiry
Product Description
Maipuda® softened water testing reagents are divided into pH reagents, residual chlorine test reagents, and calcium and magnesium reagents, which are used to detect different components.
1.PH reagent for testing water PH
Capacity: 10ml
Specifications: 58mm high, 18mm in diameter
Scope of application: industrial water, household drinking water, water purifiers, tap water, etc.
Usage: Add 2 drops of this reagent to 30ml of water and shake well. According to the color change of the solution on the north side, refer to the color chart to read the value of the corresponding solution.
1.PH reagent for testing water PH
Capacity: 10ml
Specifications: 58mm high, 18mm in diameter
Scope of application: industrial water, household drinking water, water purifiers, tap water, etc.
Usage: Add 2 drops of this reagent to 30ml of water and shake well. According to the color change of the solution on the north side, refer to the color chart to read the value of the corresponding solution.
Composition of PH test pen
2. OTO residual chlorine tester
Capacity: 10ml
Purpose: Test the residual chlorine concentration in water
Specifications: 58mm high and 18m in diameter
Scope of application: industrial water, household drinking water, water purifiers, tap water and other fields
Usage: Add 2 drops of this reagent to 30ml of water and shake well. According to the color change of the solution on the north side, refer to the color chart to read the value of the corresponding solution being tested.
3. Calcium and magnesium reagent
Capacity: 10ml
Purpose: Test the calcium and magnesium content in water
Specifications: 58mm high and 18mm in diameter
Scope of application: Water purifiers, tap water, groundwater, boiler water and other fields
Usage: Take 30ml of water sample, drop 5 drops of calcium and magnesium reagent, and compare the water samples before and after the test. If the water sample becomes turbid after the test, it indicates that the calcium and magnesium ion content of the water sample is above 120mg/L, and the water quality has a certain hardness.
Capacity: 10ml
Purpose: Test the residual chlorine concentration in water
Specifications: 58mm high and 18m in diameter
Scope of application: industrial water, household drinking water, water purifiers, tap water and other fields
Usage: Add 2 drops of this reagent to 30ml of water and shake well. According to the color change of the solution on the north side, refer to the color chart to read the value of the corresponding solution being tested.
3. Calcium and magnesium reagent
Capacity: 10ml
Purpose: Test the calcium and magnesium content in water
Specifications: 58mm high and 18mm in diameter
Scope of application: Water purifiers, tap water, groundwater, boiler water and other fields
Usage: Take 30ml of water sample, drop 5 drops of calcium and magnesium reagent, and compare the water samples before and after the test. If the water sample becomes turbid after the test, it indicates that the calcium and magnesium ion content of the water sample is above 120mg/L, and the water quality has a certain hardness.
Hot Tags:
Related Category
Send Inquiry
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Related Products
